KROHNE SU 600 EN - Manual (Page 12)

105
80
ø 4,5*
1
Fig. 3: Wall mounting
1 Metal strap
1 Remove the pluggable terminal strips from the top
and bottom.
2 Screw pin [3] into the rear of SU 600 and tighten with
a screwdriver.
3 Insert SU 600 from the front into the front panel [1].
4 Place the clamping strap [2] from the back over the
pin [3] and pull it with the knurled nut [4] against the
panel [1].
Panel mounting
12 SU 600 - 4 … 20 mA signal conditioning
Mounting
30652
-EN
-050525