Asus Pedestal Server TS100-E4/PI2 - Manual (Page 9)

ix
About this guide
Audience
This user guide is intended for system integrators, and experienced users
with at least basic knowledge of configuring a server.
Contents
This guide contains the following parts:
1. Chapter 1: Product Introduction
This chapter describes the general features of the server, including
sections on front panel and rear panel specifications.
2. Chapter 2: Hardware setup
This chapter lists the hardware setup procedures that you have to
perform when installing or removing system components.
3. Chapter 3: Motherboard information
This chapter gives information about the motherboard that comes
with the server. This chapter includes the motherboard layout, jumper
settings, and connector locations.
4. Chapter 4: BIOS information
This chapter tells how to change system settings through the BIOS
Setup menus and describes the BIOS parameters.
5. Chapter 5: RAID configuration
This chapter tells how to change system settings through the BIOS Setup
menus. Detailed descriptions of the BIOS parameters are also provided.
6. Chapter 6: Driver installation
This chapter provides instructions for installing the necessary drivers
for different system components.
7. Appendix: Reference information
This appendix includes additional information that you may refer to
when configuring the motherboard.