Asus Pedestal Server TS100-E4/PI2 - Manual (Page 119)

ASUS TS100-E4/PI2 5-19
5.3.2 Adding or viewing a RAID configuration
You can add a new RAID configuration or view an existing configuration using
the View/Add Configuration command.
Adding a new RAID configuration
To add a new RAID configuration:
1. From the Management Menu, highlight Configure, then press .
2. Use the arrow keys to select View/Add Configuration, then press
ter>.
3. The ARRAY SELECTION MENU displays the available drives connected
to the SATA ports. Select the drive(s) you want to include in the RAID
set, then press . When selected, the drive indicator changes
from READY to ONLIN A[X]-[Y], where X is the array number, and Y is
The information of the selected hard disk drive displays at the bottom of
the screen.