Asus Pedestal Server TS100-E4/PI2 - Manual (Page 109)

ASUS TS100-E4/PI2 5-9
5.2.5 Exiting the Intel ® Matrix Storage Manager
utility
To exit the utility:
1. From the utility main menu, select 4. Exit, then press . This
window appears.
Are you sure you want to exit? (Y/N):
[ CONFIRM EXIT ]
2. Press to exit or press to return to the utility main menu.
5.2.4 Resetting Disks to Non-RAID
2. Use the up/down arrow key to highlight the RAID set drive you want to
reset, then press to select.
3. Press to reset the RAID set drive. A confirmation message ap-
pears.
4. Press to reset the drive or press to return to the utility main
menu.
5. Follow steps 2 to 4 to select and reset other RAID set drives.
[ RESET RAID DATA ]
Resetting RAID data will remove internal RAID structures
from the selected RAID disks. By removing these structures,
the drive will revert back to a non-RAID disk.
WARNING: Resetting a disk causes all data on the disk to be lost.
Port Drive Model Serial # Size Status
0 XXXXXXXXXXXX XXXXXXXX XX.XGB Member Disk
1 XXXXXXXXXXXX XXXXXXXX XX.XGB Member Disk
Select the disks that should be reset.
[↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete
Take caution before you reset a RAID volume HDD to non-RAID. Resetting
a RAID volume HDD deletes all internal RAID structure on the drive.
To reset a RAID set hard disk drive:
1. From the utility main menu, select 3. Reset Disks to Non-RAID, then
press to display this screen.