Asus Pedestal Server TS100-E4/PI2 - Manual (Page 26)

Chapter 2: Hardware setup 2-8
A
A B
B
3. Connect the CPU fan cable to the connectors on the motherboard
labeled CPU_FAN1.
Do not forget to connect the CPU fan connector to CPU_FAN1 !
Hardware monitoring errors can occur if you fail to plug this connector.
2. Fasten the screws in a diagonal
sequence to secure the heatsink
and fan assembly in place.
P5M2-M/C_TS100-E
4
®
P5M2-M/C_TS100-E4 CPU Fan connector
GND
FANPWR2 FA
N_PWM
CPU_FAN1
• Orient the heatsink and fan assembly such that the CPU fan cable is
closest to the CPU_FAN1 connector.
• An X-pad™ comes pre-installed under the motherboard.