Asus Pedestal Server TS100-E4/PI2 - Manual (Page 113)

ASUS TS100-E4/PI2 5-13
5.3.1 Creating a RAID set
The LSI Logic Embedded SATA RAID Setup Utility allows you to create a RAID
0 or RAID 1 set using two types of configurations: Easy and New.
In Easy Configuration, the logical drive parameters are set automatically in-
cluding the size and stripe size (RAID 1 only).
In New Configuration, you manually set the logical drive parameters and as-
sign the set size and stripe size (RAID 1 only).
3. The utility main window appears. Use the arrow keys to select an option
from the Management Menu, then press . Refer to the Manage-
ment Menu descriptions below.
At the bottom of the screen is the legend box. The keys on the legend
box allow you to navigate through the setup menu options or execute
commands. The keys on the legend box vary according to the menu
level.
Menu Description
Configure Allows you to create RAID 0 or RAID 1 set using the Easy
Configuration or the New Configuration command. This menu also
allows you to view, add, or clear RAID configurations or select the
boot drive
Initialize Allows you to initialize the logical drives of a created RAID set
Objects Allows you to initialize logical drives or change the logical drive
parameters
Rebuild Allows you to rebuild failed drives
Check Consistency Allows you to check the data consistency of the logical drives of a
created RAID set