Asus Pedestal Server TS100-E4/PI2 - Manual (Page 20)

Chapter 2: Hardware setup 2-2
2.1 Removing the side cover
To remove the side cover:
1. Use a Philips screwdriver to remove the screw on the side cover.
2. Locate the two side cover locks.
3. Move the side cover to the direction of
the arrow.
4. Lift the side cover, then set aside.
4
4
3. Press the side cover locks
outward, then pull the side cover
toward the rear panel for about
one-half inch.
3
1
2
2
1