KROHNE MFC 300 FOUNDATION FIELDBUS EN - Manual (Page 26)

4
OPERATION
26
MFC 300
www.krohne.com 02/2013 - 4001086702 - AD MFC 300 FF R02 en
SELECTOR_DIAG SELECTOR_DIAG SELECTOR_DIAG SELECTOR_DIAG
_CONC _CONC _CONC _CONC
Selector Diagnosis Selector Diagnosis Selector Diagnosis Selector Diagnosis
Concentration Concentration Concentration Concentration
R/W Selector for concentration functions and diagnosis.
Please note: The following subelements are only writeable by
setting "OOS" in MODE_BLK, see before!
-
SELECT_DIAG1
Diagnosis 1
R/W Select diagnosis 1 value. Off
Setting:
• Off
• Drive Level
• Strain IC
• Sensor Average
• Tube Frequency
• Sensor Deviation
• Strain MT
• 2 Phase Signal
SELECT_DIAG2
Diagnosis 2
R/W Select diagnosis 2 value. Off
Setting:
• Off
• Drive Level
• Strain IC
• Sensor Average
• Tube Frequency
• Sensor Deviation
• Strain MT
• 2 Phase Signal
SELECT_CONC1
Concentration 1
R/W Select concentration 1 value Off
Setting:
• Off
• Brix
• % NaOH
• % mass
• Baume 144
• Plato
• % volume
• Baume 145
• API
SELECT_CONC2
DIAG3
Concentration 2/
Diagnosis 3
R/W Select concentration 2 or diagnosis 3 values. Off
Setting:
• Off
• Brix
• % NaOH
• % mass
• Baume 144
• Plato
• % volume
• Baume 145
• API
• Drive Level
• Strain IC
• Sensor Average
• Tube Frequency
• Sensor Deviation
• Strain MT
• 2 Phase Signal
Parameter Parameter Parameter Parameter
Subelement Access Description and settings Initial Value