KROHNE UFM 3030 EN - Manual (Page 5)

1.4 CE Approvals
EMC, Electromagnetic Compatibility Directive
EMC directive 89/336/EEC.
Low Voltage Directive
73/23/EEC and is designed in accordance with EN IEC 61010-1 first and second
edition.
Pressure Equipment Directive 97/23/EC / Module H
2 Mechanical Installation
2.1 Handling the flowmeter
Important: Do not lift the compact
flowmeter by the signal converter
housing or the terminal box. Check the
weight of the flowmeter as indicated on
the type plate before handling the unit.
When handling the flowmeter avoid hard
blows, jolts or impacts.
Do not place the flowmeter on the signal
converter housing.
2.2 Installation location and position
If required the position of the signal converter can be modified by turning the display through 90° or
180°
Keep measuring tube completely filled at all times for proper flow measurement. Non-wetted sensors
UFM 3030 5