KROHNE UFM 3030 EN - Manual (Page 18)

18
UFM 3030
3.02.09 K1 Product constant K1
Range: : 10-9 through 109
3.02.10 K2 Product constant K2
Range: : 10-9 through 109
3.02.11 DENSITY 15 Product density at T = 15 °C
Range: 500 through 2000 kg/m³
3.02.12 FULL SCALE Heat measurement
Full scale setting and unit for Heat power.
GJ/s, GJ/hr, MJ/s, MJ/hr, GCal/s, GCal/hr, MCal/s, MCal/hr
3.02.13 BATCH VOL Batch volume Total size and units.
m³, Liter, US.Gallon, Barrel or user definable unit
Range: 0.025 through 100000 m³
3.03.00 DISPLAY Submenu 3.03.00 Display (see Function 1.02.01)
3.03.01 DISP FLOW Display of flow
RATE (full-scale units)
Percent (percentage of full-scale, 0% - 100%)
NO DISPLAY (no flow display)
3.03.02 FUNCT TOT Function of Totalizer
ACT FLOW (actual flow units)
CORR FLOW (corrected flow units)
POS BOTH (both, only forward)
3.03.03 DISP TOTAL Display of Totalizer (see Function 1.02.02)
A Totalizer can be selected here for displaying. Available options
are TOTAL OFF, FORWARD, REVERSE, BOTH, SUM, BOTH +
SUM, NO DISPLAY
3.03.04 TOTAL VOL Unit for volume Totalizer
X10 m³, US.Gallon, m³, Barrel, liter
3.03.05 TOTAL ENER Unit for energy Totalizer
X 10 GJ, GJ, MJ, GCal, MCal
3.03.06 VOS Unit for Velocity Of Sound
NO DISPLAY, m/s, feet/s
3.03.07 CYCL DISP Cyclic display of measured values
NO, YES
3.03.08 ERROR MSG Display error messages
NO, YES
3.03.09 DATE Display date
NO, YES
3.03.10 AN INPUT Display analog inputs
NO, YES
3.03.11 SIGN LEVEL Display signal level
NO, YES
3.04.00 CURR OUTP Submenu 3.04.00 Current output
3.04.01 FUNCTION Function of current output
OFF (switched off)
ACT FLOW (actual flow)
CORR FLOW (corrected flow), see Function 3.02.02 and 3.02.08
through 3.02.11
F/R IND (forward/reverse indication of actual flow)
VOS (velocity of sound, range is defined in Function 3.01.11 and
3.01.12)
GAIN (sensor signal gain, range is 0 dBV through 100 dBV)
AN INP 1 (analog input 1)
AN INP 2 (analog input 2)