KROHNE UFM 3030 EN - Manual (Page 14)

14
UFM 3030
Main menu level Main menu level
Submenu level Submenu level
Function level Function level
Data level Data level
Fct. 4.00.00
PARAM ERR
Fct. 4.01.00
FLOW VELOC
Fct. 4.01.01
FULL SCALE
1.0000E+2
m3/hr
Fct. 1.00.00
OPERATION
Fct. 1.01.00
FLOW
Fct. 1.01.01
FULL SCALE
1.0000E+2
m3/hr
Fct. 1.00.00
STORE YES
Fct. 1.00.00
STORE NO
Fct. 1.00.00
RETURN
Fct. 4.00.00
STORE YES
Fct. 4.00.00
STORE NO
Fct. 4.00.00
RETURN
CODE 2
- -
100.0
m3/hr
Fct. 0.00.01
VIEW ERR
Error
messages
Data acceptance
level
(only appears
after change
of data)
Data acceptance
level
(only appears
after change
of data)
Measuring
mode
Measuring
mode
Error/
Totalizer reset
mode
Error/
Totalizer reset
mode
Parameter
setting
mode
Parameter
setting
mode
Parameter
error
mode
Parameter
error
mode
CODE 1
- - - - - - - - -
Parameter
check
9 x
START START
Key Measuring mode Menu mode Data level
→ Go to the parameter setting mode,
function 1.00.00 OPERATION. If access
CODE 1 is activated, CODE 1 must be
entered first. Using function 3.07.02
access CODE 1 can be activated or
deactivated. Go to the next, lower
menu level. Go to the next character
or change line (only
when 2 lines are
displayed)
↵ Go to the error/Totalizer reset mode (via
"CODE 2") Return to the previous
(higher) menu level or
leave the menu mode. Accept entered value
↑ Cycle through measured values, see
Function 3.03.07 CYCL DISP Cycle through menu
options within actual
menu level. Cycle active digit up to
new values
Function Text Description and settings
0.00.00 ERROR/TOT Main menu 0.00.00 Error/Totalizer
0.00.01 VIEW ERR View error messages list
0.00.02 RST ERR Reset error messages
NO RESET (keep error messages list)
RESET (reset error messages list)
0.00.03 RST TOTAL Reset Totalizer (option available depending on setting in 3.7.8)
RESET ALL (reset all Totalizer values)
NO RESET (keep Totalizer values)