ADTRAN 600 Series - Manual (Page 57)

Total Access 600 Series SHDSL IAD User Interface Guide/64200683L1-31B
Page 57
© 2002, ADTRAN, Inc. Total Access 600 Series User Manual
Appendix B. Updating Total Access 600 Firmware using TFTP
TA 600 supports firmware updates via the IP network using TFTP from a network server. The network server must be
capable of supporting TFTP server requests from the TFTP client within the TA 600.
You must have a level 2 password to perform updates to the Total Access 600. Please consult the Total Access 600
administrator if this password is not known.
You must obtain the appropriate update file from ADTRAN Technical Support at (888) 4ADTRAN (423-8726).
You must copy the update file provided by ADTRAN to a network server that supports TFTP server requests. Record
both the IP address of the server and the full path location of the update file to be downloaded.
The following materials are required.
• A PC with a Telnet client software
• A TFTP Server accessible on the local network (a TFTP Server is provided as part of the ADTRAN Utilities
software)
To prevent electrical shock, do not install equipment in a wet location or during a lightning
storm.
Electronic modules can be damaged by static electrical discharge. Before handling modules, wear
an antistatic discharge wrist strap to prevent damage to electronic components. Place modules in
antistatic packing material when transporting or storing. When working on modules, always place
them on an approved antistatic mat that is electrically grounded.