KANOMAX 2211 Handheld IAQ Monitor - Manual (Page 36)

31
Of the output range, the low end will be set at 0V and the high end will be set at 1V .
Data output interval is always 1 second.
Way To Take In Measured Data
（ analog output）
Explanation
Take the data at every
1 second, output the
value every 1 second.
Display Procedure
Press
Use
to select [6.UTILITY],
Press .
Use to select [3.ANALOG OUTPUT].
Press .
Use to Select [1.OUTPUT SELECT],
press
Use to select CO, CO2 （CO
2
） , TMP. （temperature）,
and HUM. （humidity）.
Select the data
Press .
Use to select [2.]
Press .
Use to select the range
Press .
0 1 2 3 4sec.（Time)
V