KANOMAX 2211 Handheld IAQ Monitor - Manual (Page 15)

10
3. NORMAL Measurement
This is the mode that you will be in, when you first
turn on the instrument. In this mode you cannot
save any data. The display will be updated every
1 second.
3.1 Selecting the Measuring Parameters
Display Procedure
①
Press , and display mode moves in order, as shown below.
② CO, CO
2
, Temperature→① CO, CO
2
, Humidity
② 2
, CO Humidity Measuring>
Press , and display mode moves in order, as shown
below, Humidity, Dew Point Temperature [DT], Wet-bulb
Temperature [WB], Absolute Humidity [AH], and Humidity Ratio
[HR]).See P.45 for detailed information for each item.
③
④
To move to NORMAL Mode from other measuring mode,
Press .
Use to select “1. NORMAL”.