KANOMAX 2211 Handheld IAQ Monitor - Manual (Page 17)

12
4. Measuring Maximum, Minimum & Mean
Calculation Mode will automatically calculate the maximum, minimum and mean of measured data.
Display Procedure
Press .
Use to select “2. CALCULATION”
Press .
TRIAL(1) TRIAL(2) TRIAL(N)
Measuring Time・・・ Sampling Time × Ｎ（Number of Trial）
Sampling Time
● Average (AVG)
AVG＝ΣTRIAL(N)/N
● Maximum (MAX)
MAX＝TRIAL(i)
● Minimum
MIN＝TRIAL(j)
CALCULATION MODE DISPLAY ICONS
1.CALCULATION MODE
AVERAGE： Take the average of each second within
sampling time and count it as a 1 measured data.
INSTANT： Make the measurement at the last
second of the sampling time, and count it as a 1
measured data.
2. SAMPLING TIME （1 – 999 sec.）
To set the length of sampling time of measurement.
3. No. TRIAL （1 – 999）
To set the number of trials (data) needed of desired
sampling time.
4. DATA STRORAGE （YES or NO）
5. SET TO START
Save the setting and return to standby.
Total Memory
Remaining Memory