KANOMAX 2211 Handheld IAQ Monitor - Manual (Page 19)

14
＜ READY＞
Press
to start.
Display Procedure
＜ While Measuring＞
Press to stop.
If you have selected “ YES ” for “ 4. DATA
STORAGE ?”, the measured data will be stored.
Press can also stop the measurement but this would not store
any data.
＜ Result＞
After all the trials are finished, the calculated result will appear in
display.
Press
to check each parameter in order of CO
２
,
CO, Temperature, Humidity, DP, WB, AH, and HR.
In the case of DP, WB, AH, and HR, only mean values are
displayed.
Press to return to Main MENU. Calculation data will be
stored when [4.DATA STORAGE] is set to [YES].
Related Functions:
■ If printer is connected: press to print out the result.
■ To recall stored data → P.19
■ Print Out -- P.21
■ What is DT, WB, AH, HR -- P.45,46,47