Jenway 6850 - Manual (Page 50)

50
Place the accessory in the correct orientation and
re-tighten the two fixing screws to fix the 8 cell
accessory in place.
11.3 USING THE 8 POSITON AUTOMATIC CELL CHANGER
When the automatic 8 cell turret is installed the
current cell position is indicated below the lamp status
icons in the top right hand corner of the screen.
To activate the accessory press the Cell key on the
instrument keypad. The indicated cell position will be
highlighted on screen.
Each cell position is selected by pressing the
corresponding digit on the numeric keypad. e.g.
position 6 is selected by pressing the number 6 key
on the instrument keypad. The instrument display will
update to show the new automatic cell changer
position.
Press the Cell key on the keypad to de-activate the 8 position automatic cell changer.
Fixing
screws