In-Situ D-cell Lithium Battery Kit for TROLL 9500/9000 and miniTROLL External Power User Manual
Lithium batteries, For selected in-situ products
Instruction Sheet
miniTROLL/Multi-Parameter
Water Quality TROLL
®
Batteries are shipped separately for customer installation in lithium-powered
devices.
PHYSICAL DESCRIPTION
Battery type
Lithium Thionyl Chloride, D size
Voltage
Approx. 3.6 VDC per cell
Battery life estimates
See individual product sheets
Lithium content
Approx. 4 g per cell
Operating temperature
-55°C to 85°C (-70°F to 185°F)
Storage temperature
30°C max. (86°F)
INSTALLATION
1. Remove existing battery or batteries from the device. Dispose of lithium
batteries in accordance with local regulations.
2. Insert new lithium batteries as shown in the battery orientation diagram for
your device.
LITHIUM BATTERIES
FOR SELECTED IN-SITU PRODUCTS
Regulatory information on handling lithium batteries is in the Code of Federal Regulations at 49 CFR 172.702 and 29 CFR 1910.120.
Use only Saft LSH-20 3.6V
lithium D cells. Use of any other
lithium battery will void the
product warranty.
Caution: Inhalation Hazard
Don't expose batteries to water
Do install according to the battery orientation diagram in the device
Don't return batteries to In-Situ (unless you are certified in accordance with 49 CFR and/or IATA regulations)
Do dispose of used batteries properly, in accordance with local regulations
Don't use lithium batteries in a TROLL 9000E (the 4 D-cell model)
Don't attempt to transport batteries on passenger aircraft
Do locate the enclosed MSDS sheet and retain it for reference
Lithium
Battery
Cautions
PLEASE DO NOT RETURN LITHIUM BATTERIES TO IN-SITU
INC. Dispose of them as you would alkaline batteries, or contact
your local recycling facility. Many battery retailers will recycle
lithium batteries.
Catalog No. 48230
The disc packed between the batteries isolates them during
shipment; discard before installing the batteries.
When replacing batteries in two-battery devices, replace both
at the same time.