In-Situ Buoy Radio & Board Replacement Kit User Manual

Instruction sheet, Buoy radio and board replacement kit, Kit contents

Text mode
Original mode

Instruction Sheet

Buoy Radio and Board Replacement Kit

Part Number 0094060

Kit Contents

Desiccant pack (0087630)

Buoy transceiver board with micro processor assembly (0072070)

Radio with wire antenna (0075340)

It is important to install radio (0075340) on board (0087960 Rev. F
or later). Boards prior to revision F are not compatible with this
radio.

Programming Module Purchased Separately

A programming module (0085410) is necessary for programming the radios with the
network settings.

Information subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HERMIT, iSitu, Pocket-Situ, RDO,
RuggedCable, RuggedReader, TROLL, and Win-Situ are trademarks or registered trademarks of In-Situ Inc.

0094062 | Rev. 001 | 05/2013

Table of contents

Document Outline

1 Kit Contents
2 Programming Module Purchased Separately
3 Radio Settings Definitions
4 Program Radio Network Settings
5 Determining Settings from a Known-Good Radio
6 Copy Guidelines
7 Install Desiccant Pack
8 Standard Radio Network Diagram
9 Radio Network Diagram Including a Repeater