GW Instek GUT-6000A - Manual (Page 8)

GUT-6000A USER MANUAL
8
OPERATIONAL INSTRUCTIONS
1. OPERATIONAL PROCEDURES
STEP1. Plug in AC power cord, then switch power on.
The black light of LCD is on and presents software version.
It starts self-test.
STEP2. Auto search the IC number and test if an IC is on the socket.
STEP3. Use TTL/CMOS to switch the selection of ''TTL74'', ''CMOS40'' or
''CMOS45'' series ICs.
No system error found displays on the LCD
System error shows on the LCD if it is detected.