GW Instek GUT-7000 - Manual (Page 8)

GUT-7000 USER MANUAL
8
OPERATIONAL INSTRUCTIONS
1. GENERAL OPERATION
STEP1. Plug in AC power cord, then switch power on.
The black light of LCD is on and presents software version. It starts self-
test.
STEP2. Auto search the IC number and test if an IC is on the socket.
STEP3. Use "TYPE" to switch the selection of "OP", "OPTO", "REG" or "DRV"
series ICs.
✽ When the power is on , please do not put any devices on the SOCKET or it will
cause the damages of the devices and machine.
No system error found displays on the LCD
System error shows on the LCD if it is detected.