GW Instek GDM-8261A Firmware Upgrade Manual - Manual (Page 5)

FIRMWARE UPDATE
5
Ethernet Card Firmware Update
Ethernet Firmware Requirements
Hardware GDM-8261(A)
GDM-8261(A) Ethernet card.
Mini jumper (shorting connector)
RJ-45 cable × 1
Router (only if there are none in the local area network)
Software Windows Operating System (XP or higher).
GDM-8261(A) Ethernet Card Firmware (*.bin).
Note: Contact your local distributor for the latest firmware.
Firmware update software (LM Flash Programmer)
LM Flash Programmer Installation
Steps 1. Click on the LMFlashProgrammer.msi file to start
the installation process.
2. Press “Next” at the Welcome screen.