GW Instek GDM-350B - Manual (Page 34)

GDM-350B User Manual
32
Operating Steps:
1. Turn the power off and remove the test leads from the meter.
2. Use a screwdriver to remove the screws from the battery cover. The old battery
can now be removed.
3. The fuses can be replaced by using a screwdriver to remove the two screws
holding the fuses in place. Only replace fuses with the same type and
specifications.
Fuse specification:
F1 Fuseφ6×25mm, F 10A H 240V
F2 Fuseφ6×25mm, F 1A H 240V