Detcon CXT-DM - Manual (Page 27)

Model CXT-DM
The menu item appears as: “Rf App ##.##.##”
Rf Software version
The menu item appears as: “Rf Sw ##.##”
Modbus ID
The menu item appears as: “Modbus ID is ##”
Serial Number
The menu item appears as: “Serial Number ##.##.##”.
This is the serial number for the radio embedded in the CXT-DM.
RF Channel
The menu item appears as: “RF Channel ##”
Network ID
The menu item appears as: “Network ID ####”
Range
The menu item appears as: “Range ###”
AutoSpan Level
The menu item appears as: “Auto Span Level ##”
Temperature Compensation Level
The menu item appears as: “Tempcomp Level ##”
Last Cal
The menu item appears as: “Last Cal ## Days”
Sensor Life
The menu item appears as: “Sensor Life ###%”
Temperature
The menu item appears as: “Temperature ##C”
When the status list sequence is complete, the ITM will revert to the “View Sensor Status” text scroll. The
user can either: 1) review list again by executing another 3-4 second hold, 2) move to another menu item by
executing a momentary hold over PGM1 or PGM2, or 3) return to Normal Operation via automatic timeout of
about 15 seconds (the display will scroll “View Sensor Status” 4 times and then return to Normal Operation).
3.4.2 Set Detection Range
The full-scale range of a CXT-DM sensor is determined at the time of order. The Plug-in Sensor is factory
calibrated for this range. The range should not be changed in the field unless directed to do so by Detcon.
CXT-DM Instruction Manual Rev. 1.6 Page 23 of 52