Detcon FP-524D-HRT - Manual (Page 22)

Model FP-524D-HRT
FP-524D-HRT Instruction Manual Rev. 0.1 Page 18 of 48
To enter a menu item, hold the magnet over PGM1 or PGM2 while the menu item is scrolling. At the
conclusion of the text scroll the “▼”prompt (“▼” for PGM2 or “▲” for PGM1) will appear, continue to hold
the magnet over PGM1 or PGM2 for an additional 3-4 seconds to enter the selected menu item. If there is no
magnet activity while the menu item text is scrolling (typically 4 repeated text scrolls), the sensor will
automatically revert to Normal Operation.
3.5.1 View Sensor Status
View Sensor Status displays all current configuration and operational parameters including: sensor type,
software version number, detection range, AutoSpan level, days since last AutoSpan, estimated remaining
sensor life, bridge current, bridge voltage, gas factor, cal factor, mA output, input voltage, and sensor ambient
temperature.
From the View Sensor Status text scroll, hold the magnet over PGM1 or PGM2 until the “▼” prompt appears
and continue to hold the magnet in place for an additional 3-4 seconds (until the display starts to scroll “Status
Is”). The display will scroll the complete list of sensor status parameters sequentially:
Sensor Model Type
The menu item appears as: “FP-524D”
Current Software Version
The menu item appears as: “V X.XXZ5”
Range of Detection
The menu item appears as: “Range XXX”
AutoSpan Level
The menu item appears as: “Auto Span Level XX”
Days Since Last AutoSpan
The menu items appears as: “Last Cal XX days”
Remaining Sensor Life
The menu item appears as: “Sensor Life XXX%”
Sensor Bridge Current
The menu item appears as: “Bridge XXXmA”
Sensor Bridge Voltage
The menu item appears as: “Bridge X.XXVDC
Gas Factor
The menu item appears as: “Gas Factor X.XX”
Cal Factor
The menu item appears as: “Cal Factor X.XX”