Delmhorst Instrument TotalCheck - Manual (Page 22)

Copyright  2006, Delmhorst Instrument Co.
Page 22 of 32

Return to Main Menu: This menu option returns the meter to Main Menu. The
meter also returns to Main Menu if no user input is detected for 20 seconds.

Set Date and Time: This menu option allows user access to the date and time
set screen:
The Date and Time set screen is populated with the time and date values present
in the meter at access time.
 key action switches the row selection among
available parameters.  key act ion changes the selected parameter’s value
(for “DONE” and “CANCEL” – parameters without assigned values, the 
keys perform no function). All parameter values are incremented using the
 key and decremented using the  key. The DAY parameter moves forward
through weekdays using the  key and backward using the  key. The SELECT
(center) key is only active when menu selection is applied to “HOURS” (switch
between standard or military time), “DONE” or “CANCEL”. Selecting “DONE”
exits this screen back to the SETUP MENU and updates the clock with the newly
chosen values. Selecting “CANCEL” exits this screen back to the SETUP MENU
without updating the clock.

Set Power Off time: This menu option allows the user to change the amount of
time allowed to lapse between the last key press and meter shut-down. Allowable
range is 1min
– 9min, with a default value of 2min.

Set Backlight: This menu option allows the user to change the amount of time
allowed to lapse between the last key press and backlight shutdown. The default