Delmhorst Instrument TotalCheck User Manual
Page 18
Copyright
2006, Delmhorst Instrument Co.
Page 18 of 32
2. Use the
keys to highlight MC readings or RH-T readings. Press the
SELECT key to choose your selection.
3. By using the
keys you may select which job and location you wish to
view. If there are no readings in a job, the following screen will display:
If there area readings saved to a job, the following screen will display:
After you have made your job selection, scroll to DONE and press the SELECT
key.
A complete record of information per reading will be displayed. You will be
able to scroll through each reading, using the NEXT
key. Scroll to “DONE” if you
do not wish to see any more readings.
A selected job containing readings offers two other selectable options: “VIEW SET” and
“DONE”.
o VIEW SET: This option allows the user to view a specific range of readings in a
particular job, as opposed to the entire set, by providing a configurable start point. It
becomes useful when large numbers of readings are present in the meter. View Set
always begins by displaying “1 TO XXX”, where XXX is the maximum number of readings