Delmhorst Instrument TotalCheck - Manual (Page 2)

Copyright  2006, Delmhorst Instrument Co.
Page 2 of 32
TABLE OF CONTENTS
PAGE
GENERAL DESCRIPTION & FEATURES 4
OPERATING INSTRUCTIONS 5
NAVIGATION 5
INSTALLING THE BATTERY 5-6
TO POWER THE METER ON 7
METER USE 7
BASIC & ENHANCED MODES 7
USING THE METER IN BASIC MODE 7
To Take Pins Readings in Basic Mode 7-8
To Set the Alarm in Basic Pin Mode 8
To Change the Temperature Correction 9
To Take Scan Readings in Basic Mode 9
To Set the Alarm in Basic Scan Mode 10
To Take TEMP/RH Readings in Basic Mode 10
To Reset the Meter to Default Settings in Basic Mode 11
USING THE METER IN ENHANCED MODE 11
Job Definition 11
To Create or Modify a Job in Pin Mode 11-12
To Set Temperature Correction 12-13
To Set the Alarm in Enhanced Pin Mode 13
To Take Pin Readings in Enhanced Mode 13-14
To Take Scan Readings in Enhanced Mode 14-15
To Set the Alarm in Enhanced Scan Mode 15
To Take TEMP/RH Readings in Enhanced Mode 15-16
MAIN MENU OPTIONS 16
Storage 16
View Statistics 16-17
Stored Readings 17-19
Clear Memory 19
Restore Defaults 19
IR LINK 20-21
SETUP MENU 21-23