Delmhorst Instrument Navigator User Manual

Page 11



2007, Delmhorst Instrument Co.

Page 11 of 28

Settings stored in each particular mode will not be affected by restoring defaults in a
different mode.

JOB DEFINITION:

Using Navigator in ENHANCED mode allows you to define up to 5 jobs, and select locations and
materials being tested for each location. In this mode, Navigator also stores each reading and
allows you to download the data to a PC or laptop via Infrared connection.

TO CREATE OR MODIFY A JOB IN PIN MODE:

1. From the Enhanced Main Menu, use the

п р keys to highlight JOB DEF.

2. Select a job number (from 1 to 5), using the

п р keys.

3. Press the

ò key and highlight DONE. Press SELECT.

If the job was previously defined and used, you will be asked if you want to “Update” the
job.

Select YES if you want new measurements stored under the same job number.

If it is a new job, the next screen will allow you to completely define the job.

To define a job means to choose between residential or commercial, allocate a 3 digit job ID
number, specify the temperature at which measurements will be taken, select from a list of each
of the rooms in which measurements will be taken, and select the materials used for each
location.

TO CHOOSE BETWEEN RESIDENTIAL AND COMMERCIAL:

Highlight the word COMMERCIAL and press the SELECT key. The following screen will appear: