DeFelsko PosiTector UTG v.2.2 - Manual (Page 8)

8
“Focus” is currently
at this unselected
(empty) Radio
button
“Radio” buttons.
Only one can be
selected at a time.
“List“ box
a “tick” indicates this
square box has
been selected
Calibration, Verification Calibration, Verification
and Adjustment and Adjustment
Three steps ensure best accuracy…
1.Calibration - typically done by the manufacturer
or a qualified lab
2.Verification of Accuracy - as done by the user
3.Adjustment - to a known thickness or sound
velocity for the material to be measured
Calibration
Calibration is the controlled and documented
process of measuring traceable calibration
To navigate, press (-) to scroll DOWN, (+) to scroll UP
and to SELECT. Press both (-)(+) buttons at any
time to exit any menu or select Exit from the Menu.
List boxes have a down arrow on the right-hand side.
Use the (-) and (+) buttons until your desired choice
appears, then press to select this choice and
move focus onto the next item.