DeFelsko PosiTector UTG v.2.2 - Manual (Page 14)

Print
Prints all stored measurements to the optional IR
printer or to a PC’s default Windows printer via the
optional USB cable and PosiSoft software. Press
(-)(+) simultaneously to cancel printing.
Downloading Measurements Stored in Memory
Measurements stored in the Gage's memory (in
batches) can be downloaded to a computer using
optional PosiSoft software and USB cable.
Measurements are not erased from memory after
downloading.
PosiSoft® allows entry of notes and annotations,
prints histograms and basic charts, manages data,
and readings can be exported to a document or
spreadsheet.
Remove the last reading from the current
open batch by pressing (-).
NOTE:
14
To delete a value, scroll to that value (align the “+”
symbol beside it) then either take another
measurement to change it, or press to delete it
or exit. Statistics are updated.
View
Lists all readings on the display from the current or
most recently used batch. It begins by showing the
last 10 measurement values. Scroll using the (-) or
(+) buttons. Hold for 1 second to scroll a page at a
time.
Delete
Removes a batch completely from memory. The
name is deleted and all measurements are erased.
Close
Stops the recording process, closes the current
batch, and removes the statistics from the display.