Installation, Server, Client computer – Avigilon Gallagher Command Center Integration User Manual
Page 5: Checking the licence, Server client computer checking the licence
Avigilon Control Center System Integration Guide with Gallagher Command Centre
2
Installation
Server
1. Install the Gallagher Command Centre Server software.
2. Install the Gallagher Controller API (FTCAPI) on the Gallagher Command Centre
Server.
a.
Set the Gallagher Controller IP port. Refer to the “API Location” topic in the
Gallagher Controller API Developers Guide.
b.
Verify that FTCAPI is installed correctly by running the FTCAPI test harness. It
should start with no errors.
3. Install the Avigilon Gallagher integration software (
AvigilonGallagher7.exe
).
Client Computer
Complete the following steps for all Gallagher Workstations that require the Avigilon Gallagher
integration.
1. Install the Gallagher Command Centre Workstation software.
2. Install the Avigilon Gallagher integration software (
AvigilonGallagher7.exe
).
Checking the Licence
After you have installed all the required software, you can check if the
ACC-Cardax-NVR
licence
has been properly applied:
1. Open the Avigilon Control Center Admin Tool.
2. Select the Settings tab and click Licensing. The License Activation dialog box
appears.
The dialog box must say Integration Connections: Yes or the software was not properly
licensed.