Avigilon Gallagher Command Center Integration - Manual (Page 11)

Avigilon Control Center System Integration Guide with Gallagher Command Centre
8
9. In the FT Controller API strings area, enter the alarm trigger information in the On
field in the following format:
alarmTrigger
For example: alarmTrigger 192.168.128.162 burg alarm
NOTE: The case sensitive alarm name is configured in the Avigilon Control Center Client. See
Avigilon Alarm Configuration on page 6 for more information.
10.You have the option of adding an acknowledgement string in the Off field to
automatically acknowledge the alarm in the Avigilon system. Use the following format:
alarmAck
For example: alarmAck 192.168.128.162 normal burg alarm
NOTE: can be set to normal , grant or deny . The grant and deny settings
can only be used when the alarm requires user confirmation to activate a digital output.
See Avigilon Alarm Configuration on page 6 for more information.
Alarm monitoring in Avigilon Control Center Client
All alarms configured in the Avigilon Control Center can be monitored in the Avigilon Control
Center Client. See the Avigilon Control Center Client User Guide for more information.