Avigilon Gallagher Command Center Integration - Manual (Page 14)

Avigilon Control Center System Integration Guide with Gallagher Command Centre
11
Viewing Live Video and Controlling PTZ
• In the Gallagher Command Centre, open the External Systems Master List Window,
right-click a camera and select Watch.
If the Avigilon camera is configured for pan, tilt, and zoom (PTZ), the PTZ controls will
automatically appear when you view live video.
Configuring and Viewing Recorded Video
You can only view recorded video from Avigilon cameras when the cameras are part of a
Gallagher alarm. Gallagher alarms are generated from events with an action plan. Avigilon
cameras must be added to an action plan to become part of a Gallagher alarm.
Adding Avigilon Cameras to a Gallagher Action Plan
Create an action plan to enable Avigilon cameras to record when a Gallagher alarm is triggered.
1. In the Gallagher Command Centre, open the Action Plan Master List Window and the
External Systems Master List Window.
2. Right-click the Action Plan Master List Window and select New > Action Plan.
3. In the General tab, name the new action plan.
4. Select one of the following tabs:
• Select the Armed tab if the action plan is to be associated with an Armed Alarm
Zone.