Avigilon Paxton Net2 Integration - Manual (Page 9)

a. Host Name: enter the Avigilon server IP address.
b. User name: enter the name of the Avigilon user you created for the integration. For more
information, see Adding an Integration User in Avigilon™ Control Center on page 3.
c. Password: enter the password for the user.
5. Click Detect. The cameras that are available on the Site are added to the Cameras list.
NOTE: Only cameras with logical IDs are listed. For more information, see Assigning Logical IDs to
Cameras on the previous page.
6. Click Apply.
You can now access cameras that are connected to the Avigilon Control Center through the Paxton Net2
software.
For more information about how to access recorded video from Avigilon cameras, see Using the Integration on
page 10.
Configuring Paxton Net2 for Live Video
You can watch live video from Avigilon cameras in the Paxton Net2 software by accessing the camera's web
interface. All Avigilon H.264 cameras feature a web interface. For more information about monitoring live video
in the Paxton Net2 software, see the "Integrating IP Cameras with Net2" section in the Net2 Software User
Guide.
NOTE: The default Avigilon camera username is admin and the default password is admin.
Configuring Paxton Net2 for Live Video 6