Avigilon Paxton Net2 Integration - Manual (Page 8)

Configuring The Video Integration
Assigning Logical IDs to Cameras
In the Avigilon™ Control Center Client software, assign a logical ID to each camera. The integration software will
only allows you to access cameras with a logical ID. By default, cameras do not have a logical ID.
1. In the Avigilon™ Control Center Client software, right-click a camera in the System Explorer and select
Setup.
2. In the camera Setup tab, click General.
3. In the General dialog box, enter a Logical ID: for the camera. The logical ID must be unique number.
Adding Avigilon™ Sites and Cameras to the Paxton Net2 Software
If you want to monitor Avigilon cameras in the Paxton Net2 software, you must first add Avigilon Sites and
cameras to the Net2 system.
1. On the computer where the integration is installed, launch the Net2 software and select Options > Camera
Integration.
2. In the following window, click Add to open the Add Camera Server dialog box.
3. Select Avigilon Control Center 5 then click OK.
4. Complete the following fields:
5 Configuring The Video Integration