Avigilon ACC Enterprise Web Version 5.2 - Manual (Page 56)

Avigilon Control Center Enterprise Web Client
46
Figure A. Armed image panel
Tip: You can still use the features that are common to all image panels, like snapshot or
maximizing an image panel.
To... Do this...
Arm an image panel
In an image panel, click .
The image panel is given a red border and an alarm label to
show that it is armed.
Acknowledge an alarm Click .
Move between linked
alarm video If the alarm is linked to multiple cameras, use the green arrows to
move between the linked cameras.
Disarm an image panel In an armed image panel, click .
If multiple alarms are triggered at the same time, the linked video are queued inside the armed
image panel. The alarm video are displayed by order of alarm priority then time. Once an alarm is
acknowledged or assigned to a user, the alarm video is removed from the armed image panel.
Note: If you choose to close a video in the armed image panel, the video is removed but the
alarm continues to be active.
Video triggered by a rule are queued in the armed image panel after alarms, with the most recent
video displayed first. Rules video are not labeled and do not need to be acknowledged.