Avigilon ACC Enterprise Web Version 5.2 - Manual (Page 34)

Avigilon Control Center Enterprise Web Client
24
 Inside the image panel, click .
Viewing Live and Recorded Video
When you monitor video, you can choose to watch live and recorded video in the same View, or
only one type of video per View.
Once you've added the required cameras to the View, perform the following:
 To switch the View between live and recorded video, click either Live or
Recorded on the toolbar.
 To switch individual image panels between live and recorded video, right-click the image panel
and select either Live or Recorded .
Image panels displaying recorded video have a green border.
Zooming and Panning in a Video
Use the zoom and pan tools to focus on specific areas in the live or recorded video stream.
Using the Zoom Tools
There are two ways to digitally zoom in and zoom out of the video image:
 Move your mouse over the video image then rotate your mouse wheel forward and back.
 On the toolbar, select or then click the image panel until you reach the desired zoom
depth.
Using the Pan Tools
There are two ways to pan through the video image:
 Right-click and drag inside an image panel
 On the toolbar, select then left-click and drag the video image in any direction inside the
image panel.