Aposonic A-S0402R21 - Manual (Page 51)

- 51 -
80. Please follow the Text Input method described in Section 4.1 to modify this
item.
 WAP Picture Quality – the WAP picture quality if WAP access is supported for
the DVR. Press +/- buttons to change the value.
 Video Stream – network live video stream is the same as “Record” stream, or the
others for dual streaming. If dual streaming is used, the total system recording
rate will be lowered. “Record” means that dual streaming is not used. Press
+/- buttons to change the value. To use dual streaming in I.E. or CMS, the user
must select “Extra” in “Video Stream” in the “Device List” in remote PC (Sec.
8.1).
Please note that for High compression ratio in Camera setup, dual
streaming is always used.
 IP Filter #1-4 – the IP filters #1-4 for remote access. Only those PCs with IP
addresses matching one of the IP filters can access the DVR remotely. Please
follow the Text Input method described in Section 4.1 to modify these items.
Note: If the Control Port or Data Port is not available or accessible during
remote access, the system will reset the ports to their default values, i.e.
67/68.