Triton ARGO G60 Installation Manual - Manual (Page 19)

19
ARGO G60 I
NSTALLATION
M
ANUAL
POWER SUPPLY CORD
SPECIFICATIONS
For European applications, the power supply cord must conform to the following:
1. Two-conductor with Physical Earth (PE) ground.
2. IEC 320 molded connector on one end and molded plug on the other end.
3. Certifi ed for country of installation.
4. Rated minimum H05VV-F with minimum 0.75 mm2 (except where specifi c countries
require 1.0 mm2) conductors.
5. Maximum length: 3 meters.
REFER TO THE USER MANUAL AND CONFIGURATION MANUAL FOR
OPERATIONAL INSTRUCTIONS.
NOTE: IT MAY TAKE UP TO 30 SECONDS FOR THE DISPLAY TO
ILLUMINATE, AND ANOTHER 15 SECONDS FOR THE OPERATING
SYSTEM TO LOAD.