Allied Telesis AT 8000/8POE - Manual (Page 55)

AT-8000/8POE Layer 2 Fast Ethernet Switch Installation Guide
55
Connectors and Port Pinouts
This section lists the connectors and connector pinouts for the
AT-8000/8POE Fast Ethernet Switch and their components.
Figure 21 illustrates the pin layout for an RJ-45 connector and port.
Figure 21. RJ-45 Connector and Port Pin Layout
Table 7 lists the RJ-45 pin signals when a twisted pair port is operating in
the MDI configuration.
Table 8 lists the RJ-45 port pin signals when a twisted pair port is
operating in the MDI-X configuration.
Table 9 lists the RJ-45 connector pins and their signals when a
Table 7. MDI Pin Signals (10Base-T or 100Base-TX)
Pin Signal
1 TX+
2 TX-
3 RX+
6 RX-
Table 8. MDI-X Pin Signals (10Base-T or 100Base-TX)
Pin Signal
1 RX+
2 RX-
3 TX+
6 TX-
8
8
1 1