Allied Telesis AT 8000/8POE - Manual (Page 37)

AT-8000/8POE Layer 2 Fast Ethernet Switch Installation Guide
37
Installing the Switch on a Desktop
You can place AT-8000/8POE Fast Ethernet Switch on a desktop or install
it in a 19-inch rack. To install the switch in a rack, refer to “Installing the
Switch in a Rack” on page 38.
To place the switch on a desktop, perform the following procedure:
1. Remove all equipment from the package and store the packaging
material in a safe place.
2. Turn the switch over and attach the four rubber feet to the bottom of
the switch as shown in Figure 6.
Figure 6. Attaching the Rubber Feet
3. Turn the switch over again and place it on a flat, secure surface (such
as a desk or table) leaving ample space around the unit for ventilation.
823
AT-8000/8POE 8 Po rt POE F ast Ethernet Switch
PoE
9 9R
1 3 5 7
2 4 6 8
TERMINAL POR
T 1 3 5 7
2 4 6 8
9
9R
POWER
10/100/1000 Base-T
SFP
UPLINK PORT
RS-232
DET ON ON
100 LINK AC T 10 LINK AC T
PD ON MAX CURRENT PD ERR
10/100 LINK
1000 LINK ACT
ACT
CLASS 1 LASER PRODUCT
MAIN PORT ACTIVITY
UPLINK PORT ACTIVITY