Allied Telesis AT 8000/8POE - Manual (Page 48)

Chapter 2: Installation
48
Establishing a
Remote
Connection to
Use the Web
Browser
Interface
In order for you to manage a switch using the web browser interface, the
switch must have an IP address and subnet mask. You must use the
menus interface to assign an IP address.
Note
The remote management station must be a member of the switch’s
Default VLAN. The switch responds and processes management
packets only if they are received on an untagged port of the Default
VLAN.
To start a web browser management session, perform the following
procedure:
1. Start your web browser.
Note
If your PC with the web browser is connected directly to the switch to
be managed or is on the same side of a firewall as the switch, you
must configure your browser’s network options not to use proxies.
Consult your web browser’s documentation on how to configure the
switch’s web browser to not use proxies.
2. In the URL field of the browser, enter the IP address of the switch to be
managed, as shown in Figure 18.
Figure 18. Entering a Switch’s IP Address in the URL Field
The AT-S81 management software displays the login dialog box, as
shown in Figure 19.
Figure 19. AT-S81 Login Dialog Box
Switch’s IP Address