Allied Telesis AT 8000/8POE - Manual (Page 38)

Chapter 2: Installation
38
Installing the Switch in a Rack
To install the AT-8000/8POE Fast Ethernet Switch in a rack, perform the
following procedure:
1. If attached, remove the rubber feet using a flat-head screwdriver.
2. Install a bracket on one side of the switch using a Phillips screwdriver
and four of the rack-mount screws included with the switch, as shown
in Figure 7.
Figure 7. Attaching the Rack-Mount Bracket
3. Repeat step 2 to attach the remaining bracket to the other side of the
switch.
9
9R
1
3
5
7
2
4
6
8
TERMINAL POR
T
10/100/1000 Base-T
SFP
UPLINK PO
RT
RS-232
831