Allied Telesis AT 8000/8POE - Manual (Page 36)

Chapter 2: Installation
36
Unpacking the Switch
To unpack the switch, perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Place the switch on a level, secure surface.
3. Ensure the following hardware components are included in your switch
package. If any item is missing or damaged, contact your Allied
Telesyn sales representative for assistance.
ˆ Two rack-mount brackets
ˆ Eight rack-mount bracket screws (black)
ˆ Four rack-mounting screws (stainless steel)
ˆ Four rubber feet (for desktop use)
ˆ One management cable
ˆ One power cord
ˆ Documentation CD