How to hold the receiver, Turning the receiver off, How to hold the receiver turning the receiver off – Spectra Precision MobileMapper 20 User Manual

Page 13

Engl

How to Hold the

Receiver

Tracking satellites with your receiver requires that you use the
receiver outdoor and hold it in an appropriate manner.

The receiver will have the best view of the sky when you hold
it at an angle of around 45 degrees from horizontal and not
too close to your body.

You can check that your receiver is tracking enough satellites
by running the GNSS Toolbox, and more particularly the
GNSS Status function (see GNSS Status on page 11). When
enough satellites are tracked, you can start using your
receiver and run your application software.

Turning the

Receiver Off

After you have finished your work, turn off your receiver by
holding the Power button [1] pressed until a Warning
message is displayed on the screen asking you to confirm the
power-off request. Tap

Yes. The receiver will shut down in the

next couple of seconds after a duo-tone sound has been
heard.