Seed Hawk TOOLBAR 2013 45 & XL SERIES - Manual (Page 28)

SEED HAWK® TOOLBAR OPERATOR’S MANUAL 28
4.4 PRE‐OPERATION CHECKLIST
Inspect tires. Check tire inflation pressure and adjust, if necessary.
Inspect wheel hub fasteners. Adjust torque to proper setting, if necessary.
Check depth setting of packer wheel arms. Adjust, if necessary.
Check depth setting of fertilizer knives. Adjust if necessary.
Check tractor hydraulic reservoir level. Add hydraulic fluid if level is low.
Refer to tractor Operator’s Manual.
Inspect all hydraulic lines, hoses, fittings and couplers.
IMPORTANT! Use a clean cloth to wipe any accumulated dirt from the implement and
tractor couplers prior to connecting the hydraulic system.
Inspect seed and dry fertilizer distribution system.
Make sure manual wing locks are unpinned and folded to center of machine prior to
winging machine down (NOT USED ON 7PLEX)
Make sure manual wing locks are unpinned and pin is placed in holder prior to winging
down the 30’ 45 series 3plex toolbars. SEE FIGURE 10.
NOTE: Check wheel hub fasteners periodically to ensure proper tightness, especially
prior to travel on public highways.
FIGURE 10
REMOVE WING LOCK PIN