Seca Analitics 115 - Manual (Page 38)

38 •
NOTE:
• Select the
Manual setting if your scales and
length measuring devices are not networked
with the PC. On the next dialog window, you
can enter the measurement values directly.
• You cannot use the PC software to start BIA
measurements on a seca mbca. Start BIA
measurements from the device itself and
transmit the measured results to the PC
software either wirelessly, via Ethernet or
using a USB stick.
4. Click on Measure .
The Measured values dialog window opens.
The selected measuring devices are displayed next
to the corresponding value windows.
5. Perform the measurements on the patient.
6. Make sure that the measured value is entered on
the Measured values dialog window:
– If you are working with seca 360° wireless
devices for which the automatic data
transmission is activated, the measured
values will be transmitted automatically to the
PC.
– If you are working with seca 360° wireless
devices for which the automatic data
transmission is
not activated, press the