Seca Analitics 115 - Manual (Page 18)

18 •
4. Click on OK .
The user-specific module is saved.
NOTE:
• With
Cancel selection you can de-select all
selected points with a mouse-click.
• With Cancel you can exit the dialog window
without saving settings.
• In order to delete a saved module, click on
Cancel selection , delete the module name in
the Module name field, and click on OK .
5. If desired, repeat the process for the Module 2 .
Viewing measuring
device administration
You can see which scales and length measuring
devices are connected to your PC.
The following information is displayed for each
connected measuring device:
• Device name if entered by the administrator
(recommended)
• Model
• Setup location if entered by the administrator
(recommended)
• Serial number
• Connection properties:
– seca 360° wireless : [PC name : channel;
device type]
– RS232 devices: [PC name : COM port]
In order to display the measuring device configuration,
proceed as follows:
1. From the Extras menu, select the Measuring
device administration element.