Seca Analitics 115 - Manual (Page 35)

Operation • 35
English
Entering laboratory
data
In the Laboratory data tab, you can enter the patient's
current laboratory data and waist circumference and
track the history.
If for this program an interface to your patient data
management system (PDMS) has been configured,
patient and laboratory data can be transferred from the
PDMS.
NOTE:
If you are uncertain of whether an interface has
been configured, please contact your
administrator.
In order to enter laboratory data manually, proceed as
follows:
1. Click on Laboratory data .
The Laboratory data tab is active
2. Click in a value field.
3. Enter the value.
NOTE:
You can specify the value in mg/dl or in mmol/l.
The conversion into the other value takes place
automatically as soon as you click on the empty
field.